NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
Knowledge · Grade comparison

Are "5502" HDPE blow-molding grades from different producers the same? 5502 vs 5502BN vs Q5502BN vs HY55430

"5502" is a familiar name in bottle and jerry-can blow molding, and several producers sell a grade numbered 5502. This article compares three 5502 grades with HY55430 – a blow-molding grade in the same class from LyondellBasell – using each producer's TDS.

Updated: 17 Nov 2026 · Thien An Plastics

TDS comparison

PropertyHHM 5502
Asterene – Chandra Asri (Indonesia)
HHM 5502BN
Chevron Phillips – Marlex (US)
Q 5502BN
Q-Chem – Lotrène (Qatar)
HY55430
LyondellBasell
Melt index (190 °C/2.16 kg)0.35 g/10 min0.35 g/10 min0.35 g/10 min0.3 g/10 min
HLMI (190 °C/21.6 kg)——33 g/10 min—
Density0.955 g/cm³0.955 g/cm³0.955 g/cm³0.954 g/cm³
Tensile strength at yield27 MPa27 MPa27 MPa27.6 MPa
Flexural modulus1,370 MPa1,370 MPa1,370 MPa1,310 MPa
ESCR24 h24 h24 h200 h (F50)
HDT (0.45 MPa)79 °C———
Vicat softening point———126 °C
Shore D hardness———68

Typical values from each producer's TDS, for reference only, not guaranteed specifications. "—" means not stated on the TDS. Values marked "≈" are unit conversions by Thien An for easier comparison.

Key differences

Which grade to choose?

Tips when switching grades

FAQ

Are 5502 HDPE grades from different producers the same?

Per TDS, 5502 (Chandra Asri), 5502BN (Chevron Phillips) and Q5502BN (Q-Chem) share the same key values, so they can usually substitute. Real differences are in lot consistency, colour, odour and supply.

Can HY55430 replace 5502?

HY55430 is in the same blow-molding class but has a lower MI (0.3 vs 0.35), so it flows slightly less. It can replace 5502 in many parts, but trial and adjust temperature and extrusion speed.

Does ESCR 200 h vs 24 h mean 8× more durable?

No. ESCR depends on test conditions (reagent, temperature, F50 etc.). Compare only when the method is the same.

Grade pages with TDS downloads: HHM 5502 · HHM 5502BN · Q 5502BN · HY55430

Other comparisons: PP homopolymer for injection, MFR 12 · PP impact copolymer for injection, MFR 9 · Clear random PP for injection · General-purpose injection ABS

Based on producers' public TDS, for technical reference only. For grade advice or a quote, contact Thien An Plastics: +84 389 980 742 (WhatsApp, WeChat, Zalo).

Zalo