PP raffia for woven bags: T3034, NSY114G, HP1102K, HY200, Y-130, HP550J and 1102K
PP woven bags (cement, rice, fertiliser), FIBC jumbo bags, woven sheeting and straps are all made from PP homopolymer raffia with MFR around 2.4–4. The seven popular grades below – two made in Vietnam – all belong to this group.
Updated: 19 November 2026 · Thien An Plastics
Properties from the TDS
| Property | T3034 BSR – Binh Son (Vietnam) | NSY114G NSRP – Nghi Son (Vietnam) | HP1102K Luban (OQ, Oman) | HY200 Hanwha TotalEnergies (Korea) | Y-130 Lotte Chemical | HP550J LyondellBasell | 1102K APC (Saudi Arabia) |
|---|---|---|---|---|---|---|---|
| MFR (230 °C/2.16 kg) | 3.4 g/10 min | 3.5 g/10 min | 3.4 g/10 min | 2.4 g/10 min | 4 g/10 min | 3 g/10 min | 3.4 g/10 min |
| Density | — | 0.91 g/cm³ | 0.91 g/cm³ | 0.91 g/cm³ | 0.90 g/cm³ | 0.90 g/cm³ | 0.91 g/cm³ |
| Tensile strength at yield | 362 kgf/cm² (≈35.5 MPa) | 37 MPa | 34 MPa | — | 34 MPa | — | 34 MPa |
| Flexural modulus | 14,700 kgf/cm² (≈1,442 MPa) | 1,520 MPa | — | — | 1,560 MPa | — | — |
| Notched impact (23 °C) | Izod 1.9 kg·cm/cm (≈18.6 J/m) | Izod 39 J/m | — | — | Izod 39 J/m | — | Charpy 4 kJ/m² |
| Rockwell hardness (R) | — | 95 | — | 100 | 103 | — | — |
| HDT (0.45 MPa) | — | 110 °C | — | — | — | — | 85 °C |
| Vicat softening point | — | 155 °C | — | — | — | — | 154 °C |
Typical values from each producer's TDS, for reference only and not specifications. "—" means not published in the TDS. Values marked "≈" were converted by Thien An for easier comparison.
Key differences
- Melt flow: HY200 is the lowest (2.4) – tough tapes, suited to thick tapes and straps; Y-130 is the highest (4) – easy extrusion and fast lines; the rest are around 3–3.5.
- Two Vietnamese grades: T3034 (Dung Quat refinery – BSR) and NSY114G (Nghi Son refinery). T3034 claims very high yarn strength, low water carry-over and FDA compliance; NSY114G publishes a full set of mechanical data, HDT 110 °C.
- HP1102K (Luban, Novolen process) and 1102K (APC) are both MFR 3.4 with low water carry-over. 1102K data are ISO (Charpy, HDT 85 °C), so not directly comparable with ASTM numbers.
- HP550J (LyondellBasell) is MFR 3 with conventional MWD – for tapes and straps.
Which grade to choose?
- Standard woven bags and FIBC with local stock in Vietnam: T3034, NSY114G.
- Straps and thick, tough tapes: HY200 (MFR 2.4), HP550J.
- High-speed lines, fine tapes: Y-130 (MFR 4), HP1102K, 1102K.
Notes when switching grades
- Switching MFR (e.g. 2.4 to 4) requires adjusting extrusion temperature, stretch ratio and line speed.
- Plants usually add CaCO3 filler, colour and UV masterbatch – re-test the recipe when the base resin changes.
- Check each lot's COA (actual MFR) and test tape tenacity before switching volume.
FAQ
Are T3034 and NSY114G interchangeable?
Both are Vietnamese PP homopolymer raffia grades with MFR 3.4 and 3.5, so they are usually interchangeable after a trial.
Which grade for FIBC jumbo bags?
The T3034 TDS lists FIBC bags; other MFR 3–3.5 grades also work – test tape tenacity against the required load.
Why does "low water carry-over" matter?
Raffia lines quench the film in a water bath; resin with low water carry-over leaves the bath drier and runs more stably.
Is the TDS available?
Yes. Each grade page on thienanplastics.com has the TDS for download.
Grade pages (TDS download): T3034 · NSY114G · HP1102K · HY200 · Y-130 · HP550J · 1102K
More articles: PP T3034 (Binh Son – BSR): properties and use in woven bags and FIBC · PP NSY114G (Nghi Son Refinery): properties and raffia / woven bag use · HDPE monofilament and tape grades · PP spunbond grades for nonwovens
Based on producers' public TDS; for technical reference only. For grade advice or a quote, contact Thien An Plastics: +84 389 980 742 (WhatsApp, WeChat, Zalo).