PP T3034 (Binh Son – BSR): properties and use in woven bags and FIBC
T3034 is a PP homopolymer made by Binh Son Refining & Petrochemical (BSR) at the Dung Quat refinery, Quang Ngai, Vietnam – one of the locally produced raffia grades widely used for woven bags. This article summarises its TDS data and how to use it well.
Updated: 19 November 2026 · Thien An Plastics
T3034 properties from the TDS
| Property | T3034 BSR – Binh Son (Vietnam) |
|---|---|
| MFR (230 °C/2.16 kg, ASTM D1238) | 3.4 g/10 min |
| Bulk density | 556 kg/m³ |
| Whiteness | 75 |
| Volatile loss | 0.005 % |
| Tensile strength at yield (ASTM D638) | 362 kgf/cm² (≈35.5 MPa) |
| Flexural modulus (ASTM D790) | 14,700 kgf/cm² (≈1,442 MPa) |
| Izod impact (23 °C, ASTM D256) | 1.9 kg·cm/cm (≈18.6 J/m) |
Typical values from each producer's TDS, for reference only and not specifications. "—" means not published in the TDS. Values marked "≈" were converted by Thien An for easier comparison.
Why T3034 suits woven bags
- MFR 3.4 – in the middle of the 2.4–4 range of common raffia grades (see the comparison below), balancing easy film extrusion and tape strength.
- BSR's TDS lists four features: easy and consistent processing; excellent yarn strength; uniform article quality; low water carry-over – important because the film is quenched in a water bath before slitting and stretching.
- Meets FDA 21 CFR 177.1520 for food contact – suitable for rice, sugar and feed bags.
- Made in Vietnam: short lead time, independent of international shipping routes.
Applications
- PP woven bags: cement, rice, fertiliser and animal-feed bags.
- FIBC jumbo bags.
- Woven sheets and tarpaulins.
- Tapes, straps and ropes.
Processing notes
- When adding CaCO3 filler, colour or UV masterbatch, re-check tape tenacity against the bag's load requirement.
- Check each lot's COA for actual MFR; keep pellets dry and dust-free.
- When switching from another grade (NSY114G, HP1102K, 1102K…) to T3034, run a trial and adjust stretch ratio and extrusion temperature.
- T3034 compared with six other raffia grades: PP raffia for woven bags – comparison.
FAQ
Who makes T3034?
T3034 is made by Binh Son Refining & Petrochemical JSC (BSR, part of Petrovietnam) at the Dung Quat refinery, Quang Ngai, Vietnam.
Can T3034 be used for food bags?
The TDS states T3034 meets FDA 21 CFR 177.1520 for food contact. The final product must still be assessed against the target market's rules.
Which grades can replace T3034?
PP raffia grades with MFR 3–3.5 such as NSY114G (Nghi Son), HP1102K (Luban) and 1102K (APC) – trial first.
Where can I buy T3034 with a TDS?
Thien An Plastics supplies T3034 in original bags with its TDS; contact +84 389 980 742 (WhatsApp, WeChat, Zalo) for a quote.
Grade pages (TDS download): T3034
More articles: PP raffia for woven bags: T3034, NSY114G, HP1102K, HY200, Y-130, HP550J and 1102K · PP NSY114G (Nghi Son Refinery): properties and raffia / woven bag use · PP spunbond grades for nonwovens
Based on producers' public TDS; for technical reference only. For grade advice or a quote, contact Thien An Plastics: +84 389 980 742 (WhatsApp, WeChat, Zalo).