NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
HDPE · High-density polyethylene

HDPE FI0750 resin

High molecular weight HDPE blown film · SABIC

High molecular weight HDPE copolymer with a balance of toughness and stiffness, good impact and a low gel level (per TDS). Thien An Plastics supplies FI0750 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
SABIC
Polymer
HDPE – High-density polyethylene
Type
High molecular weight HDPE blown film
Processing
Blown film, co-extrusion

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is FI0750?

HDPE FI0750 from SABIC is a High molecular weight HDPE blown film, high-load melt index (190 °C/21.6 kg): 7.5 g/10 min; density: 0.950 g/cm³. FI0750 is typically used for: heavy-duty bags, grocery sacks, shopping bags, refuse bags, liners for multi-wall sacks, liners for frozen meat, blending with LLDPE and LDPE. Thien An Plastics (Hanoi, Vietnam) supplies FI0750 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: SABIC FI0750, HDPE FI0750, FI 0750, SABIC HDPE FI0750

Applications

Typical properties – FI0750

PropertyValueUnit
High-load melt index (190 °C/21.6 kg)7.5g/10 min
Melt flow rate (190 °C/5.0 kg)0.22g/10 min
Density0.950g/cm³
Vicat softening temperature (50 N, VST/B)75°C
Brittleness temperature< -80°C
Hardness, Shore D (15 s)62
Film tensile strength at break (MD / TD)50 / 45MPa
Film elongation at break (MD / TD)400 / 450%
Dart impact F50 (ASTM D1709)240g
Elmendorf tear strength (MD / TD, ISO 6383-2)250 / 450mN

Measured on 20 µm blown film, BUR 4, 100% FI0750 (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is FI0750?

FI0750 (SABIC FI0750) is a High molecular weight HDPE blown film produced by SABIC, in the High-density polyethylene (HDPE) family.

What are the melt index and density of FI0750?

High-load melt index (190 °C/21.6 kg): 7.5 g/10 min; Density: 0.950 g/cm³.

What is FI0750 used for?

FI0750 is typically used for: Heavy-duty bags, Grocery sacks, shopping bags, Refuse bags, Liners for multi-wall sacks, Liners for frozen meat, Blending with LLDPE and LDPE.

Where can I buy FI0750 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies FI0750 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other HDPE grades

Zalo