HDPE B5308 resin
Multimodal HMW-HDPE, floating PV floaters · SABIC
Outstanding ESCR, excellent mechanics and toughness. Thien An Plastics supplies B5308 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC HDPE B5308)
- Polymer
- HDPE – High-density polyethylene
- Type
- Multimodal HMW-HDPE, floating PV floaters
- Processing
- Blow molding
What is B5308?
HDPE B5308 from SABIC is a multimodal HMW-HDPE, floating PV floaters, melt index (190 °C/5 kg): 0.32 g/10 min; high-load melt index (190 °C/21.6 kg): 8 g/10 min. B5308 is typically used for: floaters for floating PV systems. Thien An Plastics (Hanoi, Vietnam) supplies B5308 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC HDPE B5308, HDPE B5308, Sabic B5308
Applications
- Floaters for floating PV systems
Typical properties – B5308
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/5 kg) | 0.32 | g/10 min |
| High-load melt index (190 °C/21.6 kg) | 8 | g/10 min |
| Density | 0.953 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is B5308?
B5308 (SABIC HDPE B5308) is a multimodal HMW-HDPE, floating PV floaters produced by SABIC, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of B5308?
Melt index (190 °C/5 kg): 0.32 g/10 min; High-load melt index (190 °C/21.6 kg): 8 g/10 min.
What is B5308 used for?
B5308 is typically used for: Floaters for floating PV systems.
Where can I buy B5308 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies B5308 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.