HDPE 50100 resin
HDPE large-part blow molding · GS Caltex
Chromium-catalysed, with high melt strength, rigidity and ESCR. Thien An Plastics supplies 50100 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- GS Caltex (GS Caltex 50100)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE large-part blow molding
- Processing
- Blow molding
What is 50100?
HDPE 50100 from GS Caltex is a HDPE large-part blow molding, high-load melt index (190 °C/21.6 kg): 9.75 g/10 min; density: 0.948 g/cm³. 50100 is typically used for: jerricans, shipping containers, agricultural chemical tanks. Thien An Plastics (Hanoi, Vietnam) supplies 50100 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: GS Caltex 50100, HDPE 50100, GSC 50100
Applications
- Jerricans
- Shipping containers
- Agricultural chemical tanks
Typical properties – 50100
| Property | Value | Unit |
|---|---|---|
| High-load melt index (190 °C/21.6 kg) | 9.75 | g/10 min |
| Density | 0.948 | g/cm³ |
| Tensile strength at yield | 25 | MPa |
| Flexural modulus | 1200 | MPa |
| Environmental stress crack resistance (ESCR) | 1000 | h |
| Vicat softening point | 126 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 50100?
50100 (GS Caltex 50100) is a HDPE large-part blow molding produced by GS Caltex, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of 50100?
High-load melt index (190 °C/21.6 kg): 9.75 g/10 min; Density: 0.948 g/cm³.
What is 50100 used for?
50100 is typically used for: Jerricans, Shipping containers, Agricultural chemical tanks.
Where can I buy 50100 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 50100 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.