HDPE M80063S resin
HDPE injection, UV-stabilised · SABIC
Very narrow molecular weight distribution; excellent stiffness with good impact. Thien An Plastics supplies M80063S in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC HDPE M80063S)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection, UV-stabilised
- Processing
- Injection molding
What is M80063S?
HDPE M80063S from SABIC is a HDPE injection, UV-stabilised, melt flow rate (190 °C/2.16 kg): 8 g/10 min; density: 0.964 g/cm³. M80063S is typically used for: industrial cases and boxes, produce and beverage crates, pails and buckets. Thien An Plastics (Hanoi, Vietnam) supplies M80063S in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC HDPE M80063S, HDPE M80063S, M80063, Sabic M80063S
Applications
- Industrial cases and boxes
- Produce and beverage crates
- Pails and buckets
Typical properties – M80063S
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 8 | g/10 min |
| Density | 0.964 | g/cm³ |
| Tensile strength at yield | 25 | MPa |
| Flexural modulus | 864 | MPa |
| Notched Izod impact (23 °C) | 84 | J/m |
| Vicat softening point | 128 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is M80063S?
M80063S (SABIC HDPE M80063S) is a HDPE injection, UV-stabilised produced by SABIC, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of M80063S?
Melt flow rate (190 °C/2.16 kg): 8 g/10 min; Density: 0.964 g/cm³.
What is M80063S used for?
M80063S is typically used for: Industrial cases and boxes, Produce and beverage crates, Pails and buckets.
Where can I buy M80063S and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies M80063S with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.