HDPE B4660 resin
HDPE homopolymer, blow molding · SABIC
High rigidity, toughness and good processability; allows weight reduction with very good top load. Thien An Plastics supplies B4660 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC HDPE B4660)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE homopolymer, blow molding
- Processing
- Blow molding
What is B4660?
HDPE B4660 from SABIC is a HDPE homopolymer, blow molding, melt flow rate (190 °C/2.16 kg): 0.7 g/10 min; high-load melt index (190 °C/21.6 kg): 46 g/10 min. B4660 is typically used for: dairy product bottles, juice packaging. Thien An Plastics (Hanoi, Vietnam) supplies B4660 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC HDPE B4660, HDPE B4660, Sabic B4660, B 4660
Applications
- Dairy product bottles
- Juice packaging
Typical properties – B4660
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 0.7 | g/10 min |
| High-load melt index (190 °C/21.6 kg) | 46 | g/10 min |
| Density | 0.961 | g/cm³ |
| Tensile strength at yield | 30 | MPa |
| Flexural modulus | 1100 | MPa |
| Vicat softening point | 127 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is B4660?
B4660 (SABIC HDPE B4660) is a HDPE homopolymer, blow molding produced by SABIC, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of B4660?
Melt flow rate (190 °C/2.16 kg): 0.7 g/10 min; High-load melt index (190 °C/21.6 kg): 46 g/10 min.
What is B4660 used for?
B4660 is typically used for: Dairy product bottles, Juice packaging.
Where can I buy B4660 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies B4660 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.