LLDPE SEETEC UL814 resin
Butene LLDPE injection · Lotte Chemical
Unipol process; good moldability, toughness, ESCR. Thien An Plastics supplies SEETEC UL814 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical (Lotte LLDPE UL814)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Butene LLDPE injection
- Processing
- Injection molding
What is SEETEC UL814?
LLDPE SEETEC UL814 from Lotte Chemical is a butene LLDPE injection, melt index (190 °C/2.16 kg): 20 g/10 min; density: 0.924 g/cm³. SEETEC UL814 is typically used for: housewares, lids. Thien An Plastics (Hanoi, Vietnam) supplies SEETEC UL814 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Lotte LLDPE UL814, UL814, LLDPE UL814
Applications
- Housewares
- Lids
Typical properties – SEETEC UL814
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 20 | g/10 min |
| Density | 0.924 | g/cm³ |
| Tensile strength at yield | 10.3 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is SEETEC UL814?
SEETEC UL814 (Lotte LLDPE UL814) is a butene LLDPE injection produced by Lotte Chemical, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of SEETEC UL814?
Melt index (190 °C/2.16 kg): 20 g/10 min; Density: 0.924 g/cm³.
What is SEETEC UL814 used for?
SEETEC UL814 is typically used for: Housewares, Lids.
Where can I buy SEETEC UL814 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies SEETEC UL814 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.