LLDPE 118WM resin
Butene LLDPE, general film · SABIC
Tough films with good puncture resistance, tensile strength and hot tack. Thien An Plastics supplies 118WM in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC LLDPE 118WM)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Butene LLDPE, general film
- Processing
- Blown film
What is 118WM?
LLDPE 118WM from SABIC is a butene LLDPE, general film, melt flow rate (190 °C/2.16 kg): 0.9 g/10 min; density: 0.921 g/cm³. 118WM is typically used for: general-purpose film. Thien An Plastics (Hanoi, Vietnam) supplies 118WM in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC LLDPE 118WM, LLDPE 118WM, Sabic 118WM
Applications
- General-purpose film
Typical properties – 118WM
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 0.9 | g/10 min |
| Density | 0.921 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 118WM?
118WM (SABIC LLDPE 118WM) is a butene LLDPE, general film produced by SABIC, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of 118WM?
Melt flow rate (190 °C/2.16 kg): 0.9 g/10 min; Density: 0.921 g/cm³.
What is 118WM used for?
118WM is typically used for: General-purpose film.
Where can I buy 118WM and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 118WM with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.