LLDPE 2020F resin
LLDPE film (UNIPOL) · PetroChina (Kunlun)
Produced by UNIPOL gas-phase process. Thien An Plastics supplies 2020F in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- PetroChina (Kunlun) (Kunlun LLDPE 2020F)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- LLDPE film (UNIPOL)
- Processing
- Blown film
What is 2020F?
LLDPE 2020F from PetroChina (Kunlun) is a LLDPE film (UNIPOL), melt flow rate (190 °C/2.16 kg): 2 g/10 min; density: 0.92 g/cm³. 2020F is typically used for: general blown film. Thien An Plastics (Hanoi, Vietnam) supplies 2020F in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Kunlun LLDPE 2020F, LLDPE 2020F, Kunlun 2020F, DFDA 2020F
Applications
- General blown film
Typical properties – 2020F
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 2 | g/10 min |
| Density | 0.92 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 2020F?
2020F (Kunlun LLDPE 2020F) is a LLDPE film (UNIPOL) produced by PetroChina (Kunlun), in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of 2020F?
Melt flow rate (190 °C/2.16 kg): 2 g/10 min; Density: 0.92 g/cm³.
What is 2020F used for?
2020F is typically used for: General blown film.
Where can I buy 2020F and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 2020F with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.