LLDPE ASRENE UI2650 resin
LLDPE injection · SCG Chemicals (Asrene)
Excellent moldability, toughness and ESCR; not UV stabilized. Thien An Plastics supplies ASRENE UI2650 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SCG Chemicals (Asrene) (ASRENE UI2650)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- LLDPE injection
- Processing
- Injection molding
What is ASRENE UI2650?
LLDPE ASRENE UI2650 from SCG Chemicals (Asrene) is a LLDPE injection, melt index (190 °C/2.16 kg): 50 g/10 min; density: 0.927 g/cm³. ASRENE UI2650 is typically used for: injection molding, powder coating, bottle closures, masterbatch. Thien An Plastics (Hanoi, Vietnam) supplies ASRENE UI2650 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: ASRENE UI2650, UI2650, LLDPE UI2650
Applications
- Injection molding
- Powder coating
- Bottle closures
- Masterbatch
Typical properties – ASRENE UI2650
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 50 | g/10 min |
| Density | 0.927 | g/cm³ |
| Vicat softening point | 90 | °C |
| Environmental stress crack resistance (ESCR) | 30 | h |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is ASRENE UI2650?
ASRENE UI2650 (ASRENE UI2650) is a LLDPE injection produced by SCG Chemicals (Asrene), in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of ASRENE UI2650?
Melt index (190 °C/2.16 kg): 50 g/10 min; Density: 0.927 g/cm³.
What is ASRENE UI2650 used for?
ASRENE UI2650 is typically used for: Injection molding, Powder coating, Bottle closures, Masterbatch.
Where can I buy ASRENE UI2650 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies ASRENE UI2650 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.