LLDPE LL 6201.19 resin
Butene LLDPE, thin-wall injection · ExxonMobil
Narrow MWD, very easy processing; tough and tear-resistant for freezer use. Thien An Plastics supplies LL 6201.19 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- ExxonMobil (ExxonMobil LLDPE LL 6201)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Butene LLDPE, thin-wall injection
- Processing
- Injection molding
What is LL 6201.19?
LLDPE LL 6201.19 from ExxonMobil is a butene LLDPE, thin-wall injection, melt index (190 °C/2.16 kg): 50 g/10 min; density: 0.926 g/cm³. LL 6201.19 is typically used for: closures and dispensers, housewares, freezer lids, protective caps. Thien An Plastics (Hanoi, Vietnam) supplies LL 6201.19 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: ExxonMobil LLDPE LL 6201, LL6201, LL 6201, LL6201.19
Applications
- Closures and dispensers
- Housewares
- Freezer lids
- Protective caps
Typical properties – LL 6201.19
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 50 | g/10 min |
| Density | 0.926 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is LL 6201.19?
LL 6201.19 (ExxonMobil LLDPE LL 6201) is a butene LLDPE, thin-wall injection produced by ExxonMobil, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of LL 6201.19?
Melt index (190 °C/2.16 kg): 50 g/10 min; Density: 0.926 g/cm³.
What is LL 6201.19 used for?
LL 6201.19 is typically used for: Closures and dispensers, Housewares, Freezer lids, Protective caps.
Where can I buy LL 6201.19 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies LL 6201.19 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.