NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
LLDPE · Linear low-density polyethylene

LLDPE LL 4004AZ resin

Butene LLDPE for wire & cable (silane cross-linking) · ExxonMobil

Designed for low-voltage power cable insulation by one-step or two-step silane cross-linking (per TDS). Thien An Plastics supplies LL 4004AZ in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
ExxonMobil (current name: ExxonMobil™ C4LL 3524.AZ)
Polymer
LLDPE – Linear low-density polyethylene
Type
Butene LLDPE for wire & cable (silane cross-linking)
Processing
Wire & cable extrusion

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is LL 4004AZ?

LLDPE LL 4004AZ from ExxonMobil is a Butene LLDPE for wire & cable (silane cross-linking), melt index (190 °C/2.16 kg): 3.5 g/10 min; density: 0.924 g/cm³. LL 4004AZ is typically used for: lV silane cross-linkable insulation, 1-step, lV silane cross-linkable insulation, 2-step, halogen-free flame retardant (HFFR) compounds, telecom thermoplastic jacketing. Thien An Plastics (Hanoi, Vietnam) supplies LL 4004AZ in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: LL4004AZ, 4004AZ, C4LL 3524.AZ, ExxonMobil LL 4004AZ

Applications

Typical properties – LL 4004AZ

PropertyValueUnit
Melt index (190 °C/2.16 kg)3.5g/10 min
Density0.924g/cm³
Peak melting temperature124°C
Tensile stress at yield16MPa
Tensile strength at break11MPa
Elongation at yield10%
Elongation at break610%
Flexural modulus (1% secant)440MPa
Hardness, Shore D (15 s)52
Volume resistivity (500 V)9.6E+14Ω·m
Relative permittivity (50 Hz)2.30
Dissipation factor (50 Hz)2.8E-4

Mechanical properties per ASTM, electrical properties per IEC 62631 (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is LL 4004AZ?

LL 4004AZ (ExxonMobil LL 4004AZ) is a Butene LLDPE for wire & cable (silane cross-linking) produced by ExxonMobil, in the Linear low-density polyethylene (LLDPE) family.

What are the melt index and density of LL 4004AZ?

Melt index (190 °C/2.16 kg): 3.5 g/10 min; Density: 0.924 g/cm³.

What is LL 4004AZ used for?

LL 4004AZ is typically used for: LV silane cross-linkable insulation, 1-step, LV silane cross-linkable insulation, 2-step, Halogen-free flame retardant (HFFR) compounds, Telecom thermoplastic jacketing.

Where can I buy LL 4004AZ and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies LL 4004AZ with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other LLDPE grades

Zalo