LLDPE Titanvene LL3550UA resin
Rotomolding PE for large tanks, UV-stabilized · Lotte Chemical Titan
Medium-density PE for large containers with high UV exposure; food-contact capable. Thien An Plastics supplies Titanvene LL3550UA in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical Titan (Titanvene LL3550UA)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Rotomolding PE for large tanks, UV-stabilized
- Processing
- Rotational molding
What is Titanvene LL3550UA?
LLDPE Titanvene LL3550UA from Lotte Chemical Titan is a rotomolding PE for large tanks, UV-stabilized, melt flow rate (190 °C/2.16 kg): 5 g/10 min; density: 0.932 g/cm³. Titanvene LL3550UA is typically used for: large rotomolded containers. Thien An Plastics (Hanoi, Vietnam) supplies Titanvene LL3550UA in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Titanvene LL3550UA, LL3550UA, LLDPE LL3550UA
Applications
- Large rotomolded containers
Typical properties – Titanvene LL3550UA
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 5 | g/10 min |
| Density | 0.932 | g/cm³ |
| Melting point | 124 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Titanvene LL3550UA?
Titanvene LL3550UA (Titanvene LL3550UA) is a rotomolding PE for large tanks, UV-stabilized produced by Lotte Chemical Titan, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of Titanvene LL3550UA?
Melt flow rate (190 °C/2.16 kg): 5 g/10 min; Density: 0.932 g/cm³.
What is Titanvene LL3550UA used for?
Titanvene LL3550UA is typically used for: Large rotomolded containers.
Where can I buy Titanvene LL3550UA and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Titanvene LL3550UA with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.