LLDPE LH3750M resin
Metallocene LLDPE, rotomolding · Daelim
Excellent stiffness, clarity, impact and dimensional stability; AO+UV; FDA. Thien An Plastics supplies LH3750M in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Daelim (Daelim mLLDPE LH3750M)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Metallocene LLDPE, rotomolding
- Processing
- Rotational molding
What is LH3750M?
LLDPE LH3750M from Daelim is a metallocene LLDPE, rotomolding, melt index (190 °C/2.16 kg): 5 g/10 min; density: 0.937 g/cm³. LH3750M is typically used for: drums and tanks, toys. Thien An Plastics (Hanoi, Vietnam) supplies LH3750M in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Daelim mLLDPE LH3750M, mLLDPE LH3750M, Daelim LH3750M
Applications
- Drums and tanks
- Toys
Typical properties – LH3750M
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 5 | g/10 min |
| Density | 0.937 | g/cm³ |
| Vicat softening point | 118 | °C |
| Melting point | 124 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is LH3750M?
LH3750M (Daelim mLLDPE LH3750M) is a metallocene LLDPE, rotomolding produced by Daelim, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of LH3750M?
Melt index (190 °C/2.16 kg): 5 g/10 min; Density: 0.937 g/cm³.
What is LH3750M used for?
LH3750M is typically used for: Drums and tanks, Toys.
Where can I buy LH3750M and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies LH3750M with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.