LLDPE HM2420 resin
Hexene LLDPE, high-gloss injection · Sasol
High gloss, excellent low-temperature impact, good ESCR. Thien An Plastics supplies HM2420 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sasol (Sasol LLDPE HM2420)
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- Hexene LLDPE, high-gloss injection
- Processing
- Injection molding
What is HM2420?
LLDPE HM2420 from Sasol is a hexene LLDPE, high-gloss injection, melt index (190 °C/2.16 kg): 20 g/10 min; density: 0.924 g/cm³. HM2420 is typically used for: injection containers and lids, masterbatch base polymer. Thien An Plastics (Hanoi, Vietnam) supplies HM2420 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sasol LLDPE HM2420, LLDPE HM2420, Sasol HM2420
Applications
- Injection containers and lids
- Masterbatch base polymer
Typical properties – HM2420
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 20 | g/10 min |
| Density | 0.924 | g/cm³ |
| Tensile strength at yield | 15 | MPa |
| Flexural modulus | 440 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HM2420?
HM2420 (Sasol LLDPE HM2420) is a hexene LLDPE, high-gloss injection produced by Sasol, in the Linear low-density polyethylene (LLDPE) family.
What are the melt flow rate and density of HM2420?
Melt index (190 °C/2.16 kg): 20 g/10 min; Density: 0.924 g/cm³.
What is HM2420 used for?
HM2420 is typically used for: Injection containers and lids, Masterbatch base polymer.
Where can I buy HM2420 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HM2420 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.