NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
LLDPE · Linear low-density polyethylene

LLDPE HF2508 resin

Fractional-melt hexene LLDPE for heavy-duty sacks · Sasol

Fractional melt index hexene LLDPE with good machinability, for industrial sacks and liners (per TDS). Thien An Plastics supplies HF2508 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
Sasol (current name: HF2508 (trước đây HF2508X))
Polymer
LLDPE – Linear low-density polyethylene
Type
Fractional-melt hexene LLDPE for heavy-duty sacks
Processing
Blown film

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is HF2508?

LLDPE HF2508 from Sasol is a Fractional-melt hexene LLDPE for heavy-duty sacks, melt index (190 °C/2.16 kg): 0.8 g/10 min; density: 0.925 g/cm³. HF2508 is typically used for: industrial heavy-duty sacks, consumer trash can liners, thick and thin films. Thien An Plastics (Hanoi, Vietnam) supplies HF2508 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: HF2508X, Sasol HF2508, HF 2508, LLDPE HF2508X

Applications

Typical properties – HF2508

PropertyValueUnit
Melt index (190 °C/2.16 kg)0.8g/10 min
Density0.925g/cm³
Film tensile strength at yield (MD / TD)16.3 / 19.7MPa
Film tensile strength at break (MD / TD)58.8 / 43.1MPa
Film elongation at break (MD / TD)600 / 730%
Film 1% secant modulus (MD / TD)302 / 337MPa
Dart drop impact (ASTM D1709A)74g/25.4 µm
Elmendorf tear strength (MD / TD)230 / 826g/25.4 µm
Gloss (45°)56
Haze9%

Film properties on 20 µm blown film, BUR 2.5, 6 in die, 1.8 mm die gap (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is HF2508?

HF2508 (Sasol HF2508) is a Fractional-melt hexene LLDPE for heavy-duty sacks produced by Sasol, in the Linear low-density polyethylene (LLDPE) family.

What are the melt index and density of HF2508?

Melt index (190 °C/2.16 kg): 0.8 g/10 min; Density: 0.925 g/cm³.

What is HF2508 used for?

HF2508 is typically used for: Industrial heavy-duty sacks, Consumer trash can liners, Thick and thin films.

Where can I buy HF2508 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies HF2508 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other LLDPE grades

Zalo