NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
LLDPE · Linear low-density polyethylene

LLDPE EFDA-7047 resin

LLDPE blown film, no slip/antiblock · EQUATE

LLDPE for tubular blown film; tough films with high tensile strength and puncture resistance; contains no slip or antiblock; meets US FDA and EC food-contact regulations (per TDS). Thien An Plastics supplies EFDA-7047 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
EQUATE
Polymer
LLDPE – Linear low-density polyethylene
Type
LLDPE blown film, no slip/antiblock
Processing
Blown film

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is EFDA-7047?

LLDPE EFDA-7047 from EQUATE is a LLDPE blown film, no slip/antiblock, melt index (190 °C/2.16 kg): 1.0 g/10 min; density: 0.918 g/cm³. EFDA-7047 is typically used for: industrial liners, blown stretch wrap, heavy-duty films, general-purpose blown films. Thien An Plastics (Hanoi, Vietnam) supplies EFDA-7047 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: EFDA7047, EFDA 7047, Equate EFDA-7047, LLDPE 7047

Applications

Typical properties – EFDA-7047

PropertyValueUnit
Melt index (190 °C/2.16 kg)1.0g/10 min
Density0.918g/cm³
Peak melting temperature124°C
Film tensile strength at break (MD / TD)34 / 26MPa
Film 1% secant modulus (MD / TD)193 / 221MPa
Dart drop impact (ASTM D1709A)105g
Elmendorf tear strength (MD / TD)35 / 135N/mm
Puncture energy (EQUATE method)70J/mm
Haze11%
Gloss (45°)65
AdditivesNone

Film properties on 25 µm blown film at 2:1 BUR (per EQUATE TDS). Recommended melt temperature about 180–210 °C, die gap ≥ 1.8 mm. Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is EFDA-7047?

EFDA-7047 (EQUATE EFDA-7047) is a LLDPE blown film, no slip/antiblock produced by EQUATE, in the Linear low-density polyethylene (LLDPE) family.

What are the melt index and density of EFDA-7047?

Melt index (190 °C/2.16 kg): 1.0 g/10 min; Density: 0.918 g/cm³.

What is EFDA-7047 used for?

EFDA-7047 is typically used for: Industrial liners, Blown stretch wrap, Heavy-duty films, General-purpose blown films.

Where can I buy EFDA-7047 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies EFDA-7047 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other LLDPE grades

Zalo