
LLDPE 222WJ resin
High-flow LLDPE blown film, high slip/antiblock · SABIC
Relatively high MFR for easy processing; films with high transparency, good toughness and good extrusion behaviour; high slip and antiblock (per TDS). Thien An Plastics supplies 222WJ in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC
- Polymer
- LLDPE – Linear low-density polyethylene
- Type
- High-flow LLDPE blown film, high slip/antiblock
- Processing
- Blown film
Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)
What is 222WJ?
LLDPE 222WJ from SABIC is a High-flow LLDPE blown film, high slip/antiblock, melt index (190 °C/2.16 kg): 2.2 g/10 min; density: 0.921 g/cm³. 222WJ is typically used for: general-purpose film, clothes packaging, agricultural film. Thien An Plastics (Hanoi, Vietnam) supplies 222WJ in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC 222WJ, LLDPE 222WJ, 222 WJ, SABIC LLDPE 222WJ
Applications
- General-purpose film
- Clothes packaging
- Agricultural film
Typical properties – 222WJ
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 2.2 | g/10 min |
| Density | 0.921 | g/cm³ |
| Peak melting temperature | 122 | °C |
| Film tensile strength at break (MD / TD) | 35 / 30 | MPa |
| Film elongation at break (MD / TD) | 765 / 925 | % |
| Film 1% secant modulus (MD / TD) | 205 / 255 | MPa |
| Dart drop impact (ASTM D1709A) | 90 | g |
| Elmendorf tear strength (MD / TD) | 125 / 350 | g |
| Gloss (45°) | 55 | |
| Haze | 15 | % |
| Additives | Slip + antiblock |
Film properties on 30 µm blown film, 125 mm die, 2.0 mm die gap, 170 °C, BUR 2.0 (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 222WJ?
222WJ (SABIC 222WJ) is a High-flow LLDPE blown film, high slip/antiblock produced by SABIC, in the Linear low-density polyethylene (LLDPE) family.
What are the melt index and density of 222WJ?
Melt index (190 °C/2.16 kg): 2.2 g/10 min; Density: 0.921 g/cm³.
What is 222WJ used for?
222WJ is typically used for: General-purpose film, Clothes packaging, Agricultural film.
Where can I buy 222WJ and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 222WJ with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.