PP Y40L for diapers and face masks
Y40L is a fiber-grade PP homopolymer from Dongguan Grand Resource with MFR 40 g/10 min, intended by the producer for spunbond nonwoven fabric. This article explains which layers of a diaper and a face mask Y40L is used for, why its properties fit, and what to check when choosing resin.
Key points
- Used for: spunbond nonwovens – diaper topsheet, backsheet fabric, leg cuffs; outer and inner layers of face masks; disposable clothing.
- Not for: the meltblown filter layer of masks (needs a very high melt-flow meltblown PP).
- Strengths per TDS: narrow molecular weight distribution, low odor, gas-fading resistance, high-toughness spunbond fabric.
Y40L properties (producer TDS)
| Melt flow rate (230 °C/2.16 kg) | 40.0 g/10 min | GB/T 3682.1 |
| Isotacticity | ≥ 95.0 % | GB/T 2412 |
| Tensile yield strength | > 29.0 MPa | GB/T 1040.2 |
| Yellow index | ≤ 3.0 | GB/T 39822 |
| Ash | ≤ 0.06 % | GB/T 9345.1 |
| Fish eyes | >0.8 mm: <10 · 0.4–0.8 mm: <40 | GB/T 6595 |
Typical values from the TDS (enterprise standard Q/DGR 001—2023), for reference only, not guaranteed specifications. Please confirm against the batch COA when ordering.
According to the TDS, the producer holds ISO 9001, ISO 14001 and ISO 45001 management system certificates (plant-level certification, not a product safety certificate).
Where Y40L goes in a diaper
Baby and adult diapers use several PP nonwoven layers, mostly spunbond or SMS (spunbond/meltblown/spunbond) made from fiber-grade PP homopolymer such as Y40L:
- Topsheet: the skin-contact layer. Soft spunbond, usually given a hydrophilic finish so liquid passes quickly to the core. Low odor and low ash keep the fabric clean and comfortable.
- Backsheet: breathable PE film laminated with PP spunbond for a cloth-like outer feel.
- Leg cuffs, ears: hydrophobic spunbond or SMS that must be tough enough not to tear.
The producer TDS lists hygiene absorbent products and high-toughness spunbond fabric among Y40L's main applications.
Where Y40L goes in a face mask
- Outer layer: PP spunbond – splash resistance and shape. Y40L suitable.
- Middle layer: meltblown filter – needs very high melt-flow meltblown PP, not Y40L.
- Inner layer: soft, low-odor PP spunbond against the face. Y40L suitable.
4-ply masks, nonwoven masks and disposable gowns, caps and shoe covers use similar PP spunbond.
Why its properties fit
- MFR 40: within the melt-flow range commonly used for spunbond, flowing well enough for fine, high-speed spinning.
- Narrow molecular weight distribution: even fibers, fewer breaks, uniform fabric – important for light basis-weight hygiene fabric.
- Low odor: needed for skin- and face-contact products.
- Gas-fading resistance: white fabric yellows less in storage.
- Ash ≤ 0.06 %, YI ≤ 3.0, isotacticity ≥ 95 %: clean, white, strong fibers.
What to check when choosing resin
- Run a trial on your own spunbond line before switching volume – line conditions differ between plants.
- Check each batch COA (MFR, yellow index, ash) against the TDS.
- Alternative spunbond grades we supply: S2040 Shenhua, S2040 Oriental Energy, Y-26, Y-35, HS35NW, Y381H, UH563S, HP565S.
FAQ
Can Y40L be used for the meltblown layer of masks?
No. Meltblown needs a dedicated very high melt-flow PP. Y40L (MFR 40) is for the outer and inner spunbond layers.
Which diaper layers use Y40L?
The spunbond nonwoven layers: topsheet (usually with a hydrophilic finish), the fabric side of the backsheet, leg cuffs and ears.
Where can I buy Y40L, is a TDS available?
Thien An Plastics Co., Ltd (Hanoi, Vietnam) supplies Y40L in original bags; the TDS can be downloaded on this page. Hotline / WhatsApp / WeChat / Zalo: +84 389 980 742.