How do oil prices affect PP and PE resin prices?
When oil rises, resin prices usually follow – but not by the same percentage and not at the same time. This article traces the path from a barrel of crude to a bag of resin, explains why resin sometimes holds firm while oil falls, and lists the indicators buyers should watch.
Updated: 16 Nov 2026 · Thien An Plastics
Key points
- Most PP and PE in Asia is made from naphtha (a refinery product) → ethylene, propylene → resin. Oil prices reach resin prices mainly through this chain.
- Resin reacts later and less proportionally than oil, because it also depends on resin supply and demand, new capacity (especially in China), freight and exchange rates.
- In a supply shock (war, a closed strait), resin can rise faster than oil as sellers stop offering and buyers rush to build stock.
From crude oil to resin
- Crude → naphtha: refineries separate naphtha from crude. Naphtha prices track oil closely.
- Naphtha → ethylene, propylene: steam crackers break naphtha into olefins, the direct feedstock for PE and PP.
- Olefins → resin: ethylene is polymerized into PE (HDPE, LDPE, LLDPE); propylene into PP.
Not every plant runs on naphtha. Plants in the Middle East and the US use more ethane and propane from natural gas – cheaper and less tied to oil. China also has coal-based (CTO/MTO) and propane dehydrogenation (PDH) propylene. So the same PP grade from different sources is affected by oil to different degrees.
Why resin does not move 1:1 with oil
- Time lag: producers buy feedstock, produce, then offer for shipment weeks later. Today's oil move shows up in resin offers some time afterwards.
- Resin's own supply and demand: when new capacity (especially in China) starts up and demand is weak, resin can fall even as oil rises – and vice versa.
- Producer margins: in weak markets producers absorb thin margins to hold share; in tight markets they raise prices faster than costs.
- Freight, insurance, FX: for Vietnam, which imports most of its resin, landed cost also includes freight, surcharges and the USD/VND rate.
Real examples from 2026
- Upward: after the US–Iran conflict broke out in late February 2026 and Hormuz traffic was disrupted, Brent peaked at about USD 118/bbl on 31 March 2026. European polyolefin producers imposed surcharges of about EUR 400/t on PE and PP from mid-March. In Southeast Asia, domestic polymer prices were reported up 50–100% in some cases in March–April.
- Slow downward: in early November 2026 Brent fell to about USD 92/bbl (a roughly two-month low), yet market reports showed Asian PP and PE prices only stable to slightly lower – Chinese propylene stayed high and shipping risk remained.
More detail: The US–Iran war, the Strait of Hormuz and the resin market.
What should buyers watch?
- Brent crude: the general trend.
- Asian naphtha: closer to the cost of naphtha-based PP and PE.
- Propylene and ethylene: closest to resin prices.
- Container freight and surcharges: directly affect landed cost.
- Geopolitics: Hormuz and the Red Sea – see Houthis, the Red Sea and resin shipping.
How to apply this to purchasing: Buying resin when prices are volatile – 6 rules.
FAQ
If oil rises 10%, how much does resin rise?
There is no fixed ratio. It depends on the plant's feedstock (naphtha, gas, coal), resin supply and demand at the time, freight and exchange rates. Resin usually reacts later and less than oil, unless there is a supply shock.
Why hasn't resin fallen when oil has?
Because of the lag in the naphtha–olefin–resin chain, because producers need to recover high-cost feedstock bought earlier, and because other costs such as propylene, freight and insurance may still be high.
Is Middle East resin affected by oil prices?
Less on cost, since many Middle East plants use ethane and propane from gas. But Middle East cargoes carry heavy shipping risk through the Strait of Hormuz, so supply and prices still swing sharply when the region is in conflict.
Market information only, not investment advice. Figures from public sources up to 16 Nov 2026: Wikipedia (2026 Iran war fuel crisis), Plastics News (1 Apr 2026), PlasticsToday, Nation Thailand (9 Nov 2026), Khaleej Times (11 Nov 2026). For current prices contact Thien An Plastics: +84 389 980 742.