HDPE HDPE-YGH041T resin
HDPE pressure pipe · Sinopec
Pipe grade for pressurized pipes. Thien An Plastics supplies HDPE-YGH041T in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sinopec (Sinopec HDPE YGH041T)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE pressure pipe
- Processing
- Pipe extrusion
What is HDPE-YGH041T?
HDPE HDPE-YGH041T from Sinopec is a HDPE pressure pipe, density: 0.96 g/cm³; tensile strength at yield: 24.2 MPa. HDPE-YGH041T is typically used for: water pipe, gas pipe, drain and seawater discharge pipe. Thien An Plastics (Hanoi, Vietnam) supplies HDPE-YGH041T in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sinopec HDPE YGH041T, YGH041T, YGH 041T
Applications
- Water pipe
- Gas pipe
- Drain and seawater discharge pipe
Typical properties – HDPE-YGH041T
| Property | Value | Unit |
|---|---|---|
| Density | 0.96 | g/cm³ |
| Tensile strength at yield | 24.2 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HDPE-YGH041T?
HDPE-YGH041T (Sinopec HDPE YGH041T) is a HDPE pressure pipe produced by Sinopec, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of HDPE-YGH041T?
Density: 0.96 g/cm³; Tensile strength at yield: 24.2 MPa.
What is HDPE-YGH041T used for?
HDPE-YGH041T is typically used for: Water pipe, Gas pipe, Drain and seawater discharge pipe.
Where can I buy HDPE-YGH041T and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HDPE-YGH041T with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.