HDPE XS10N resin
Bimodal HDPE PE100 pressure pipe (natural) · Hanwha TotalEnergies
Bimodal slurry loop process; meets the highest PE pipe standards, easy processing and safe welding. Thien An Plastics supplies XS10N in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Hanwha TotalEnergies (Hanwha HDPE XS10N)
- Polymer
- HDPE – High-density polyethylene
- Type
- Bimodal HDPE PE100 pressure pipe (natural)
- Processing
- Pipe extrusion
What is XS10N?
HDPE XS10N from Hanwha TotalEnergies is a bimodal HDPE PE100 pressure pipe (natural), melt index (190 °C/5 kg): 0.3 g/10 min; density: 0.948 g/cm³. XS10N is typically used for: potable water pipe, sewage pipe, industrial pipe. Thien An Plastics (Hanoi, Vietnam) supplies XS10N in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Hanwha HDPE XS10N, HDPE XS10N, PE100 XS10N, Hanwha XS10N
Applications
- Potable water pipe
- Sewage pipe
- Industrial pipe
Typical properties – XS10N
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/5 kg) | 0.3 | g/10 min |
| Density | 0.948 | g/cm³ |
| Melting point | 129 | °C |
| Tensile strength at yield | 26 | MPa |
| Elongation at break | ≥ 700 | % |
| Flexural modulus | 1100 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is XS10N?
XS10N (Hanwha HDPE XS10N) is a bimodal HDPE PE100 pressure pipe (natural) produced by Hanwha TotalEnergies, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of XS10N?
Melt index (190 °C/5 kg): 0.3 g/10 min; Density: 0.948 g/cm³.
What is XS10N used for?
XS10N is typically used for: Potable water pipe, Sewage pipe, Industrial pipe.
Where can I buy XS10N and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies XS10N with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.