HDPE UHJ0762A resin
HDPE injection, UV-stabilized · JG Summit Olefins
High stiffness, good impact, UV-stabilized for outdoor (developmental). Thien An Plastics supplies UHJ0762A in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- JG Summit Olefins (JG Summit HDPE UHJ0762A)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection, UV-stabilized
- Processing
- Injection molding
What is UHJ0762A?
HDPE UHJ0762A from JG Summit Olefins is a HDPE injection, UV-stabilized, melt index (190 °C/2.16 kg): 6.5 g/10 min; density: 0.962 g/cm³. UHJ0762A is typically used for: crates and cases, general injection articles. Thien An Plastics (Hanoi, Vietnam) supplies UHJ0762A in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: JG Summit HDPE UHJ0762A, HDPE UHJ0762A
Applications
- Crates and cases
- General injection articles
Typical properties – UHJ0762A
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 6.5 | g/10 min |
| Density | 0.962 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is UHJ0762A?
UHJ0762A (JG Summit HDPE UHJ0762A) is a HDPE injection, UV-stabilized produced by JG Summit Olefins, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of UHJ0762A?
Melt index (190 °C/2.16 kg): 6.5 g/10 min; Density: 0.962 g/cm³.
What is UHJ0762A used for?
UHJ0762A is typically used for: Crates and cases, General injection articles.
Where can I buy UHJ0762A and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies UHJ0762A with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.