PP DaelimPoly UH513M resin
PP homopolymer, metallizable CPP film · Polymirae (Ulsan PP)
High stiffness and clarity, low gels, heat resistant; good metallizing; FDA. Thien An Plastics supplies DaelimPoly UH513M in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Polymirae (Ulsan PP) (DaelimPoly UH513M)
- Polymer
- PP – Polypropylene
- Type
- PP homopolymer, metallizable CPP film
- Processing
- BOPP / cast film
What is DaelimPoly UH513M?
PP DaelimPoly UH513M from Polymirae (Ulsan PP) is a PP homopolymer, metallizable CPP film, melt flow rate (230 °C/2.16 kg): 8 g/10 min; density: 0.9 g/cm³. DaelimPoly UH513M is typically used for: metallizable CPP film, food & clothing packaging, industrial packaging, general injection. Thien An Plastics (Hanoi, Vietnam) supplies DaelimPoly UH513M in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: DaelimPoly UH513M, UH513M, PP UH513M
Applications
- Metallizable CPP film
- Food & clothing packaging
- Industrial packaging
- General injection
Typical properties – DaelimPoly UH513M
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 8 | g/10 min |
| Density | 0.9 | g/cm³ |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is DaelimPoly UH513M?
DaelimPoly UH513M (DaelimPoly UH513M) is a PP homopolymer, metallizable CPP film produced by Polymirae (Ulsan PP), in the Polypropylene (PP) family.
What are the melt flow rate and density of DaelimPoly UH513M?
Melt flow rate (230 °C/2.16 kg): 8 g/10 min; Density: 0.9 g/cm³.
What is DaelimPoly UH513M used for?
DaelimPoly UH513M is typically used for: Metallizable CPP film, Food & clothing packaging, Industrial packaging, General injection.
Where can I buy DaelimPoly UH513M and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies DaelimPoly UH513M with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.