PP 1100N resin
PP homopolymer, injection · Advanced Polypropylene (APC)
Medium-flow propylene homopolymer for general injection molding. Thien An Plastics supplies 1100N in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Advanced Polypropylene (APC) (Advanced-PP 1100N)
- Polymer
- PP – Polypropylene
- Type
- PP homopolymer, injection
- Processing
- Injection molding
What is 1100N?
PP 1100N from Advanced Polypropylene (APC) is a PP homopolymer, injection, melt flow rate (230 °C/2.16 kg): 12 g/10 min; density: 0.91 g/cm³. 1100N is typically used for: closures, furniture, housewares, general injection molding. Thien An Plastics (Hanoi, Vietnam) supplies 1100N in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Advanced-PP 1100N, PP 1100N, 1100 N, APC 1100N
Applications
- Closures
- Furniture
- Housewares
- General injection molding
Typical properties – 1100N
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 12 | g/10 min |
| Density | 0.91 | g/cm³ |
| Tensile strength at yield | 35 | MPa |
| Notched Charpy impact (23 °C) | 3 | kJ/m² |
| Heat deflection temperature (0.45 MPa) | 85 | °C |
| Vicat softening point | 154 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is 1100N?
1100N (Advanced-PP 1100N) is a PP homopolymer, injection produced by Advanced Polypropylene (APC), in the Polypropylene (PP) family.
What are the melt flow rate and density of 1100N?
Melt flow rate (230 °C/2.16 kg): 12 g/10 min; Density: 0.91 g/cm³.
What is 1100N used for?
1100N is typically used for: Closures, Furniture, Housewares, General injection molding.
Where can I buy 1100N and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies 1100N with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.