PP UE400M resin
PP block copolymer, injection · DaelimPoly (Ulsan PP)
Spheripol process; balanced stiffness and toughness, high low-temperature impact, low warpage, good weld strength. Thien An Plastics supplies UE400M in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- DaelimPoly (Ulsan PP) (DaelimPoly UE400M)
- Polymer
- PP – Polypropylene
- Type
- PP block copolymer, injection
- Processing
- Injection molding
What is UE400M?
PP UE400M from DaelimPoly (Ulsan PP) is a PP block copolymer, injection, melt flow rate (230 °C/2.16 kg): 9 g/10 min; density: 0.9 g/cm³. UE400M is typically used for: electrical appliance parts, containers, battery cases. Thien An Plastics (Hanoi, Vietnam) supplies UE400M in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: DaelimPoly UE400M, PP UE400M, UE 400M, Daelim UE400M
Applications
- Electrical appliance parts
- Containers
- Battery cases
Typical properties – UE400M
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 9 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 270 | kg/cm² |
| Flexural modulus | 11000 | kg/cm² |
| Notched Izod impact (23 °C) | 15 | kg·cm/cm |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is UE400M?
UE400M (DaelimPoly UE400M) is a PP block copolymer, injection produced by DaelimPoly (Ulsan PP), in the Polypropylene (PP) family.
What are the melt flow rate and density of UE400M?
Melt flow rate (230 °C/2.16 kg): 9 g/10 min; Density: 0.9 g/cm³.
What is UE400M used for?
UE400M is typically used for: Electrical appliance parts, Containers, Battery cases.
Where can I buy UE400M and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies UE400M with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.