PP RC221M resin
PP terpolymer skin layer for CPP/BOPP · HMC Polymers
Low sealing temperature, good stiffness/impact balance. Thien An Plastics supplies RC221M in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- HMC Polymers (HMC PP RC221M)
- Polymer
- PP – Polypropylene
- Type
- PP terpolymer skin layer for CPP/BOPP
- Processing
- BOPP / cast film
What is RC221M?
PP RC221M from HMC Polymers is a PP terpolymer skin layer for CPP/BOPP, melt flow rate (230 °C/2.16 kg): 7 g/10 min; density: 0.9 g/cm³. RC221M is typically used for: skin layer of co-extruded CPP and BOPP films. Thien An Plastics (Hanoi, Vietnam) supplies RC221M in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: HMC PP RC221M, PP RC221M, HMC RC221M
Applications
- Skin layer of co-extruded CPP and BOPP films
Typical properties – RC221M
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 7 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 25 | MPa |
| Flexural modulus | 850 | MPa |
| Notched Izod impact (23 °C) | 47 | J/m |
| Heat deflection temperature (0.45 MPa) | 80 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is RC221M?
RC221M (HMC PP RC221M) is a PP terpolymer skin layer for CPP/BOPP produced by HMC Polymers, in the Polypropylene (PP) family.
What are the melt flow rate and density of RC221M?
Melt flow rate (230 °C/2.16 kg): 7 g/10 min; Density: 0.9 g/cm³.
What is RC221M used for?
RC221M is typically used for: Skin layer of co-extruded CPP and BOPP films.
Where can I buy RC221M and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies RC221M with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.