PP PR311 resin
Clear PP random copolymer, injection · PRefChem
Nucleated for good transparency and productivity; good organoleptics for food use. Thien An Plastics supplies PR311 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- PRefChem (PRefChem PP PR311)
- Polymer
- PP – Polypropylene
- Type
- Clear PP random copolymer, injection
- Processing
- Injection molding
What is PR311?
PP PR311 from PRefChem is a clear PP random copolymer, injection, melt flow rate (230 °C/2.16 kg): 11 g/10 min; density: 0.9 g/cm³. PR311 is typically used for: caps and closures, clear containers, housewares. Thien An Plastics (Hanoi, Vietnam) supplies PR311 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: PRefChem PP PR311, PP PR311, PR 311, Prefchem PR311
Applications
- Caps and closures
- Clear containers
- Housewares
Typical properties – PR311
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 11 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 30 | MPa |
| Flexural modulus | 1000 | MPa |
| Notched Izod impact (23 °C) | 8.3 | kJ/m² |
| Vicat softening point | 129 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PR311?
PR311 (PRefChem PP PR311) is a clear PP random copolymer, injection produced by PRefChem, in the Polypropylene (PP) family.
What are the melt flow rate and density of PR311?
Melt flow rate (230 °C/2.16 kg): 11 g/10 min; Density: 0.9 g/cm³.
What is PR311 used for?
PR311 is typically used for: Caps and closures, Clear containers, Housewares.
Where can I buy PR311 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PR311 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.