PP PH512 resin
PP homopolymer, general injection · PRefChem
Good melt flow and stiffness. Thien An Plastics supplies PH512 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- PRefChem (PRefChem PP PH512)
- Polymer
- PP – Polypropylene
- Type
- PP homopolymer, general injection
- Processing
- Injection molding
What is PH512?
PP PH512 from PRefChem is a PP homopolymer, general injection, melt flow rate (230 °C/2.16 kg): 12 g/10 min; density: 0.9 g/cm³. PH512 is typically used for: caps and closures, housewares, rigid packaging. Thien An Plastics (Hanoi, Vietnam) supplies PH512 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: PRefChem PP PH512, PP PH512, PH 512, Prefchem PH512
Applications
- Caps and closures
- Housewares
- Rigid packaging
Typical properties – PH512
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 12 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 35 | MPa |
| Flexural modulus | 1475 | MPa |
| Vicat softening point | 153 | °C |
| Heat deflection temperature (0.45 MPa) | 95 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PH512?
PH512 (PRefChem PP PH512) is a PP homopolymer, general injection produced by PRefChem, in the Polypropylene (PP) family.
What are the melt flow rate and density of PH512?
Melt flow rate (230 °C/2.16 kg): 12 g/10 min; Density: 0.9 g/cm³.
What is PH512 used for?
PH512 is typically used for: Caps and closures, Housewares, Rigid packaging.
Where can I buy PH512 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PH512 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.