PC PC1003R resin
Polycarbonate, medium-low flow, heat & UV stabilised, mold release · SABIC (Lexan)
Heat and UV stabilised with mold release. Thien An Plastics supplies PC1003R in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (Lexan) (SABIC PC1003R)
- Polymer
- PC – Polycarbonate
- Type
- Polycarbonate, medium-low flow, heat & UV stabilised, mold release
- Processing
- Injection molding
What is PC1003R?
PC PC1003R from SABIC (Lexan) is a polycarbonate, medium-low flow, heat & UV stabilised, mold release, density: 1.2 g/cm³; tensile strength at yield: 63 MPa. PC1003R is typically used for: construction applications, electrical/electronic, lighting. Thien An Plastics (Hanoi, Vietnam) supplies PC1003R in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC PC1003R, 1003R, PC 1003R, Lexan PC1003R
Applications
- Construction applications
- Electrical/electronic
- Lighting
Typical properties – PC1003R
| Property | Value | Unit |
|---|---|---|
| Density | 1.2 | g/cm³ |
| Tensile strength at yield | 63 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PC1003R?
PC1003R (SABIC PC1003R) is a polycarbonate, medium-low flow, heat & UV stabilised, mold release produced by SABIC (Lexan), in the Polycarbonate (PC) family.
What are the melt flow rate and density of PC1003R?
Density: 1.2 g/cm³; Tensile strength at yield: 63 MPa.
What is PC1003R used for?
PC1003R is typically used for: Construction applications, Electrical/electronic, Lighting.
Where can I buy PC1003R and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PC1003R with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.