PC PC0703R resin
Polycarbonate, low flow, heat & UV stabilised, mold release · SABIC (Lexan)
Heat and UV stabilised with mold release. Thien An Plastics supplies PC0703R in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (Lexan) (SABIC PC0703R)
- Polymer
- PC – Polycarbonate
- Type
- Polycarbonate, low flow, heat & UV stabilised, mold release
- Processing
- Injection molding
What is PC0703R?
PC PC0703R from SABIC (Lexan) is a polycarbonate, low flow, heat & UV stabilised, mold release, density: 1.2 g/cm³; tensile strength at yield: 63 MPa. PC0703R is typically used for: construction applications. Thien An Plastics (Hanoi, Vietnam) supplies PC0703R in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC PC0703R, 0703R, PC 0703R, Lexan PC0703R
Applications
- Construction applications
Typical properties – PC0703R
| Property | Value | Unit |
|---|---|---|
| Density | 1.2 | g/cm³ |
| Tensile strength at yield | 63 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PC0703R?
PC0703R (SABIC PC0703R) is a polycarbonate, low flow, heat & UV stabilised, mold release produced by SABIC (Lexan), in the Polycarbonate (PC) family.
What are the melt flow rate and density of PC0703R?
Density: 1.2 g/cm³; Tensile strength at yield: 63 MPa.
What is PC0703R used for?
PC0703R is typically used for: Construction applications.
Where can I buy PC0703R and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PC0703R with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.