HDPE P6006LS resin
Black HDPE pressure pipe, PE112, low sag · SABIC
Black multimodal HDPE compound PE112 with low sag for large-diameter, low-SDR pipes. Thien An Plastics supplies P6006LS in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SABIC (SABIC HDPE P6006LS)
- Polymer
- HDPE – High-density polyethylene
- Type
- Black HDPE pressure pipe, PE112, low sag
- Processing
- Pipe extrusion
What is P6006LS?
HDPE P6006LS from SABIC is a black HDPE pressure pipe, PE112, low sag, melt index (190 °C/5 kg): 0.23 g/10 min; density: 0.96 g/cm³. P6006LS is typically used for: potable water pressure pipe, gas pipe, sewage pipe, other liquid pipes. Thien An Plastics (Hanoi, Vietnam) supplies P6006LS in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: SABIC HDPE P6006LS, HDPE P6006LS, Sabic P6006LS, PE112 P6006LS
Applications
- Potable water pressure pipe
- Gas pipe
- Sewage pipe
- Other liquid pipes
Typical properties – P6006LS
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/5 kg) | 0.23 | g/10 min |
| Density | 0.96 | g/cm³ |
| Tensile strength at yield | 23 | MPa |
| Notched Charpy impact (23 °C) | 26 | kJ/m² |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is P6006LS?
P6006LS (SABIC HDPE P6006LS) is a black HDPE pressure pipe, PE112, low sag produced by SABIC, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of P6006LS?
Melt index (190 °C/5 kg): 0.23 g/10 min; Density: 0.96 g/cm³.
What is P6006LS used for?
P6006LS is typically used for: Potable water pressure pipe, Gas pipe, Sewage pipe, Other liquid pipes.
Where can I buy P6006LS and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies P6006LS with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.