HDPE P0648N resin
Bimodal HDPE, PE100 pressure pipe · Sumitomo (Polyethylene Malaysia)
Outstanding ESCR, high impact and hydrostatic strength for PE100 rating; natural pellets. Thien An Plastics supplies P0648N in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sumitomo (Polyethylene Malaysia) (Sumitomo HDPE P0648N)
- Polymer
- HDPE – High-density polyethylene
- Type
- Bimodal HDPE, PE100 pressure pipe
- Processing
- Pipe extrusion
What is P0648N?
HDPE P0648N from Sumitomo (Polyethylene Malaysia) is a bimodal HDPE, PE100 pressure pipe, high-load melt index (190 °C/21.6 kg): 6.2 g/10 min; density: 0.948 g/cm³. P0648N is typically used for: pressure pipe for water and gas, pipe and vessel lining, molded pipe fittings. Thien An Plastics (Hanoi, Vietnam) supplies P0648N in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sumitomo HDPE P0648N, HDPE P0648N, P 0648N, PE100 P0648N
Applications
- Pressure pipe for water and gas
- Pipe and vessel lining
- Molded pipe fittings
Typical properties – P0648N
| Property | Value | Unit |
|---|---|---|
| High-load melt index (190 °C/21.6 kg) | 6.2 | g/10 min |
| Density | 0.948 | g/cm³ |
| Tensile strength at yield | 23 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is P0648N?
P0648N (Sumitomo HDPE P0648N) is a bimodal HDPE, PE100 pressure pipe produced by Sumitomo (Polyethylene Malaysia), in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of P0648N?
High-load melt index (190 °C/21.6 kg): 6.2 g/10 min; Density: 0.948 g/cm³.
What is P0648N used for?
P0648N is typically used for: Pressure pipe for water and gas, Pipe and vessel lining, Molded pipe fittings.
Where can I buy P0648N and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies P0648N with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.