HDPE M7100 resin
HDPE pipe grade · Lotte Chemical (Hivorex)
Good processability; very high ESCR. Thien An Plastics supplies M7100 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical (Hivorex) (HIVOREX M7100)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE pipe grade
- Processing
- Pipe extrusion
What is M7100?
HDPE M7100 from Lotte Chemical (Hivorex) is a HDPE pipe grade, melt index (190 °C/2.16 kg): 0.06 g/10 min; melt index (190 °C/5 kg): 0.25 g/10 min. M7100 is typically used for: water pipe, sewerage pipe, gas pipe. Thien An Plastics (Hanoi, Vietnam) supplies M7100 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: HIVOREX M7100, HDPE M7100, M 7100, Lotte M7100
Applications
- Water pipe
- Sewerage pipe
- Gas pipe
Typical properties – M7100
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 0.06 | g/10 min |
| Melt index (190 °C/5 kg) | 0.25 | g/10 min |
| Density | 0.95 | g/cm³ |
| Tensile strength at yield | 230 | kg/cm² |
| Environmental stress crack resistance (ESCR) | > 1000 | h |
| Vicat softening point | 125 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is M7100?
M7100 (HIVOREX M7100) is a HDPE pipe grade produced by Lotte Chemical (Hivorex), in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of M7100?
Melt index (190 °C/2.16 kg): 0.06 g/10 min; Melt index (190 °C/5 kg): 0.25 g/10 min.
What is M7100 used for?
M7100 is typically used for: Water pipe, Sewerage pipe, Gas pipe.
Where can I buy M7100 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies M7100 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.