NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
LDPE · Low-density polyethylene

LDPE LD 160AT resin

LDPE high-clarity film, slip/antiblock · ExxonMobil

Good drawdown and optical properties (per TDS). Thien An Plastics supplies LD 160AT in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
ExxonMobil (current name: ExxonMobil™ LD 4023.AT)
Polymer
LDPE – Low-density polyethylene
Type
LDPE high-clarity film, slip/antiblock
Processing
Blown film, cast film, profile extrusion

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is LD 160AT?

LDPE LD 160AT from ExxonMobil is a LDPE high-clarity film, slip/antiblock, melt index (190 °C/2.16 kg): 4.0 g/10 min; density: 0.923 g/cm³. LD 160AT is typically used for: high-clarity film, zipper bags, produce bags, laundry film, cast film, profile extrusion. Thien An Plastics (Hanoi, Vietnam) supplies LD 160AT in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: LD160AT, 160AT, LD 4023.AT, ExxonMobil LD 160AT

Applications

Typical properties – LD 160AT

PropertyValueUnit
Melt index (190 °C/2.16 kg)4.0g/10 min
Density0.923g/cm³
Peak melting temperature108°C
Film tensile strength at yield (MD / TD)10 / 9.6MPa
Film tensile strength at break (MD / TD)23 / 15MPa
Film elongation at break (MD / TD)180 / 490%
Film 1% secant modulus (MD / TD)170 / 210MPa
Dart drop impact (ASTM D1709A)70g
Elmendorf tear strength (MD / TD)290 / 110g
Gloss (45°)71
Haze5.2%
AdditivesAntiblock 1200 / Slip 900ppm

Film properties measured on 30 µm film, 200 mm die, 1.0 mm die gap, blow-up ratio 2.5, temperature profile 180–190 °C (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is LD 160AT?

LD 160AT (ExxonMobil LD 160AT) is a LDPE high-clarity film, slip/antiblock produced by ExxonMobil, in the Low-density polyethylene (LDPE) family.

What are the melt index and density of LD 160AT?

Melt index (190 °C/2.16 kg): 4.0 g/10 min; Density: 0.923 g/cm³.

What is LD 160AT used for?

LD 160AT is typically used for: High-clarity film, Zipper bags, Produce bags, Laundry film, Cast film, profile extrusion.

Where can I buy LD 160AT and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies LD 160AT with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other LDPE grades

Zalo