NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
LDPE · Low-density polyethylene

LDPE LD 136.MN resin

LDPE blown film, good clarity, slip/antiblock · ExxonMobil

Homopolymer LDPE film resin with good clarity for blown film (per TDS). Thien An Plastics supplies LD 136.MN in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
ExxonMobil (current name: ExxonMobil™ LD 2021.MN)
Polymer
LDPE – Low-density polyethylene
Type
LDPE blown film, good clarity, slip/antiblock
Processing
Blown film

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is LD 136.MN?

LDPE LD 136.MN from ExxonMobil is a LDPE blown film, good clarity, slip/antiblock, melt index (190 °C/2.16 kg): 2.0 g/10 min; density: 0.921 g/cm³. LD 136.MN is typically used for: food packaging, form-fill-seal packaging, produce bags, textile packaging, blend partner. Thien An Plastics (Hanoi, Vietnam) supplies LD 136.MN in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: LD136.MN, LD136MN, 136.MN, LD 2021.MN, ExxonMobil LD 136.MN

Applications

Typical properties – LD 136.MN

PropertyValueUnit
Melt index (190 °C/2.16 kg)2.0g/10 min
Density0.921g/cm³
Peak melting temperature109°C
Vicat softening temperature90.0°C
Film tensile strength at yield (MD / TD)10 / 11MPa
Film tensile strength at break (MD / TD)25 / 19MPa
Film elongation at break (MD / TD)130 / 490%
Film 1% secant modulus (MD / TD)210 / 260MPa
Dart drop impact (ASTM D1709A)120g
Elmendorf tear strength (MD / TD)440 / 110g
Puncture force28N
Gloss (45°)68
Haze6.1%
AdditivesAntiblock 1500 / Slip 750ppm

Film properties measured on 38.1 µm film, 63.5 mm blown film line, blow-up ratio 2.5:1, melt temperature 171–182 °C (per TDS). Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is LD 136.MN?

LD 136.MN (ExxonMobil LD 136.MN) is a LDPE blown film, good clarity, slip/antiblock produced by ExxonMobil, in the Low-density polyethylene (LDPE) family.

What are the melt index and density of LD 136.MN?

Melt index (190 °C/2.16 kg): 2.0 g/10 min; Density: 0.921 g/cm³.

What is LD 136.MN used for?

LD 136.MN is typically used for: Food packaging, Form-fill-seal packaging, Produce bags, Textile packaging, Blend partner.

Where can I buy LD 136.MN and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies LD 136.MN with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other LDPE grades

Zalo