HDPE JG910 resin
HDPE injection, narrow MWD · SK Geo Centric (Yuclair)
Ethylene-butene copolymer with excellent impact, stiffness, warpage resistance and processability. Thien An Plastics supplies JG910 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SK Geo Centric (Yuclair) (YUCLAIR JG910)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection, narrow MWD
- Processing
- Injection molding
What is JG910?
HDPE JG910 from SK Geo Centric (Yuclair) is a HDPE injection, narrow MWD, melt index (190 °C/2.16 kg): 5 g/10 min; density: 0.963 g/cm³. JG910 is typically used for: wide range of injection-molded articles. Thien An Plastics (Hanoi, Vietnam) supplies JG910 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: YUCLAIR JG910, HDPE JG910, JG 910, SK JG910
Applications
- Wide range of injection-molded articles
Typical properties – JG910
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 5 | g/10 min |
| Density | 0.963 | g/cm³ |
| Tensile strength at yield | 260 | kg/cm² |
| Notched Izod impact (23 °C) | 10 | kg·cm/cm |
| Vicat softening point | 124 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is JG910?
JG910 (YUCLAIR JG910) is a HDPE injection, narrow MWD produced by SK Geo Centric (Yuclair), in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of JG910?
Melt index (190 °C/2.16 kg): 5 g/10 min; Density: 0.963 g/cm³.
What is JG910 used for?
JG910 is typically used for: Wide range of injection-molded articles.
Where can I buy JG910 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies JG910 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.