PP · Polypropylene
PP J-330S resin
PP block copolymer, thermoforming and blow · Lotte Chemical
Good impact and vacuum-forming performance. Thien An Plastics supplies J-330S in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical (Kopelen J-330S)
- Polymer
- PP – Polypropylene
- Type
- PP block copolymer, thermoforming and blow
- Processing
- Thermoforming, Blow molding, Extrusion
Applications
- Vacuum-formed products
- Blow-moulded goods
- Extruded sheet
Typical properties – J-330S
| Property | Value | Unit |
|---|---|---|
| Melt index (230 °C/2.16 kg) | 4 | g/10 min |
| Density | 0.9 | g/cm³ |
| Flexural modulus | 1270 | MPa |
| Tensile strength at yield | 27 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is J-330S?
J-330S (Kopelen J-330S) is a pp block copolymer, thermoforming and blow produced by Lotte Chemical, in the Polypropylene (PP) family.
What are the melt flow rate and density of J-330S?
Melt index (230 °C/2.16 kg): 4 g/10 min; Density: 0.9 g/cm³.
What is J-330S used for?
J-330S is typically used for: Vacuum-formed products, Blow-moulded goods, Extruded sheet.
Where can I buy J-330S and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies J-330S with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.
Other PP grades
Y40Sinopec · PP homopolymer, fiber gradeK8003Sinopec · PP impact (block) copolymer, injectionK8009Sinopec · PP impact (block) copolymer, injectionEP332KLyondellBasell · PP impact copolymer, injectionUH563SPolymirae (UlsanPP) · PP homopolymer, spunbond nonwovenT30SZhongjing Petrochemical · PP homopolymer, raffia/yarn