PP · Polypropylene
PP Y40 resin
PP homopolymer, fiber grade · Sinopec
Narrow molecular weight distribution, low ash, good spinnability. Thien An Plastics supplies Y40 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Sinopec (PPH-Y40)
- Polymer
- PP – Polypropylene
- Type
- PP homopolymer, fiber grade
- Processing
- Fiber spinning
Applications
- Nonwoven fabric
- Staple fiber
- Ultra-fine staple fiber
Typical properties – Y40
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (230 °C/2.16 kg) | 36 | g/10 min |
| Tensile strength at yield | 31.3 | MPa |
| Tensile modulus | 1330 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is Y40?
Y40 (PPH-Y40) is a pp homopolymer, fiber grade produced by Sinopec, in the Polypropylene (PP) family.
What are the melt flow rate and density of Y40?
Melt flow rate (230 °C/2.16 kg): 36 g/10 min; Tensile strength at yield: 31.3 MPa.
What is Y40 used for?
Y40 is typically used for: Nonwoven fabric, Staple fiber, Ultra-fine staple fiber.
Where can I buy Y40 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies Y40 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.
Other PP grades
K8003Sinopec · PP impact (block) copolymer, injectionK8009Sinopec · PP impact (block) copolymer, injectionEP332KLyondellBasell · PP impact copolymer, injectionUH563SPolymirae (UlsanPP) · PP homopolymer, spunbond nonwovenT30SZhongjing Petrochemical · PP homopolymer, raffia/yarnPB304PRefChem · PP impact copolymer, injection