HDPE J2210 resin
HDPE injection molding · Uz-Kor Gas Chemical
Good stiffness and impact strength. Thien An Plastics supplies J2210 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Uz-Kor Gas Chemical (Uz-Kor J2210)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection molding
- Processing
- Injection molding
What is J2210?
HDPE J2210 from Uz-Kor Gas Chemical is a HDPE injection molding, melt flow rate (190 °C/2.16 kg): 7.0–8.0 g/10 min; density: 0.958–0.962 g/cm³. J2210 is typically used for: silicone cartridges, housewares. Thien An Plastics (Hanoi, Vietnam) supplies J2210 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Uz-Kor J2210, HDPE J2210, J 2210
Applications
- Silicone cartridges
- Housewares
Typical properties – J2210
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 7.0–8.0 | g/10 min |
| Density | 0.958–0.962 | g/cm³ |
| Tensile strength at yield | ≥ 220 | kg/cm² |
| Flexural modulus | ≥ 11000 | kg/cm² |
| Vicat softening point | ≥ 122 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is J2210?
J2210 (Uz-Kor J2210) is a HDPE injection molding produced by Uz-Kor Gas Chemical, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of J2210?
Melt flow rate (190 °C/2.16 kg): 7.0–8.0 g/10 min; Density: 0.958–0.962 g/cm³.
What is J2210 used for?
J2210 is typically used for: Silicone cartridges, Housewares.
Where can I buy J2210 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies J2210 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.