HDPE J2200 resin
HDPE injection molding · Lotte Chemical (Hivorex)
Produced by slurry process technology. Thien An Plastics supplies J2200 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Lotte Chemical (Hivorex) (HIVOREX J2200)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection molding
- Processing
- Injection molding
What is J2200?
HDPE J2200 from Lotte Chemical (Hivorex) is a HDPE injection molding, melt index (190 °C/2.16 kg): 5 g/10 min; density: 0.965 g/cm³. J2200 is typically used for: crates, housewares, bottle caps. Thien An Plastics (Hanoi, Vietnam) supplies J2200 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: HIVOREX J2200, HDPE J2200, J 2200, Lotte J2200
Applications
- Crates
- Housewares
- Bottle caps
Typical properties – J2200
| Property | Value | Unit |
|---|---|---|
| Melt index (190 °C/2.16 kg) | 5 | g/10 min |
| Density | 0.965 | g/cm³ |
| Tensile strength at yield | 25.5 | MPa |
| Flexural modulus | 1373 | MPa |
| Notched Izod impact (23 °C) | 98 | J/m |
| Vicat softening point | 124 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is J2200?
J2200 (HIVOREX J2200) is a HDPE injection molding produced by Lotte Chemical (Hivorex), in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of J2200?
Melt index (190 °C/2.16 kg): 5 g/10 min; Density: 0.965 g/cm³.
What is J2200 used for?
J2200 is typically used for: Crates, Housewares, Bottle caps.
Where can I buy J2200 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies J2200 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.