PP J1105T resin
High-flow PP homopolymer, thin-wall injection · Hyosung (Topilene)
Nucleated, fast cycle times and good moldability. Thien An Plastics supplies J1105T in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- Hyosung (Topilene) (Topilene J1105T)
- Polymer
- PP – Polypropylene
- Type
- High-flow PP homopolymer, thin-wall injection
- Processing
- Thin-wall injection molding (TWIM)
What is J1105T?
PP J1105T from Hyosung (Topilene) is a high-flow PP homopolymer, thin-wall injection, melt index (230 °C/2.16 kg): 60 g/10 min; density: 0.9 g/cm³. J1105T is typically used for: thin-wall food containers, containers. Thien An Plastics (Hanoi, Vietnam) supplies J1105T in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Topilene J1105T, PP J1105T, J 1105T, Hyosung J1105T
Applications
- Thin-wall food containers
- Containers
Typical properties – J1105T
| Property | Value | Unit |
|---|---|---|
| Melt index (230 °C/2.16 kg) | 60 | g/10 min |
| Density | 0.9 | g/cm³ |
| Tensile strength at yield | 350 | kg/cm² |
| Flexural modulus | 18000 | kg/cm² |
| Notched Izod impact (23 °C) | 4 | kg·cm/cm |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is J1105T?
J1105T (Topilene J1105T) is a high-flow PP homopolymer, thin-wall injection produced by Hyosung (Topilene), in the Polypropylene (PP) family.
What are the melt flow rate and density of J1105T?
Melt index (230 °C/2.16 kg): 60 g/10 min; Density: 0.9 g/cm³.
What is J1105T used for?
J1105T is typically used for: Thin-wall food containers, Containers.
Where can I buy J1105T and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies J1105T with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.