NHỰA THIÊN ANTHIEN AN PLASTICS Request a quote
PP · Polypropylene

PP HHR102 resin

PP homopolymer, raffia, low flow · Sasol

Low flow (MFR 2), low water carry-over in tape extrusion, good mechanical strength; also for thick-walled injection parts (per TDS). Thien An Plastics supplies HHR102 in original bags to manufacturers in Vietnam and for export.

Producer (per TDS)
Sasol (Sasol HHR102)
Polymer
PP – Polypropylene
Type
PP homopolymer, raffia, low flow
Processing
Tape extrusion, injection, blow molding

Indicative price: 17,000 – 60,000 VND/kg (varies by grade, lot and timing – contact us for an exact quote)

What is HHR102?

PP HHR102 from Sasol is a PP homopolymer, raffia, low flow, melt flow rate (230 °C/2.16 kg): 2 g/10 min; density: 0.905 g/cm³. HHR102 is typically used for: slit-film tape for woven bags & FIBCs, strapping, thermoforming sheet, monofilament for ropes & twines. Thien An Plastics (Hanoi, Vietnam) supplies HHR102 in original bags with TDS and MSDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.

Also searched as: Sasol HHR102, HHR102, PP HHR102, Sasol PP HHR102

Applications

Typical properties – HHR102

PropertyValueUnit
Melt flow rate (230 °C/2.16 kg)2g/10 min
Density0.905g/cm³
Flexural modulus1600MPa
Tensile modulus1650MPa
Tensile strength at yield35MPa
Tensile strain at yield9%
Charpy notched impact (23 °C)4kJ/m²
Melting point168°C
Heat deflection temperature (0.46 MPa)85°C
Vicat softening point154°C

Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.

FAQ

What type of plastic is HHR102?

HHR102 (Sasol HHR102) is a PP homopolymer, raffia, low flow produced by Sasol, in the Polypropylene (PP) family.

What are the melt flow rate and density of HHR102?

Melt flow rate (230 °C/2.16 kg): 2 g/10 min; Density: 0.905 g/cm³.

What is HHR102 used for?

HHR102 is typically used for: Slit-film tape for woven bags & FIBCs, Strapping, Thermoforming sheet, Monofilament for ropes & twines.

Where can I buy HHR102 and get its TDS?

Thien An Plastics (Hanoi, Vietnam) supplies HHR102 with its TDS and MSDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.

Other PP grades

Zalo