HDPE PE HD85612 IM resin
Hexene HDPE, injection · SIBUR
Narrow MWD; rigid parts with good impact and glossy surface. Thien An Plastics supplies PE HD85612 IM in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SIBUR (Sibur HD85612 IM)
- Polymer
- HDPE – High-density polyethylene
- Type
- Hexene HDPE, injection
- Processing
- Injection molding
What is PE HD85612 IM?
HDPE PE HD85612 IM from SIBUR is a hexene HDPE, injection, melt flow rate (190 °C/2.16 kg): 7.5 g/10 min; density: 0.96 g/cm³. PE HD85612 IM is typically used for: crates, recycle bins, hard hats. Thien An Plastics (Hanoi, Vietnam) supplies PE HD85612 IM in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sibur HD85612 IM, HD85612, HD 85612
Applications
- Crates
- Recycle bins
- Hard hats
Typical properties – PE HD85612 IM
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 7.5 | g/10 min |
| Density | 0.96 | g/cm³ |
| Tensile strength at yield | 32 | MPa |
| Flexural modulus | 1500 | MPa |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PE HD85612 IM?
PE HD85612 IM (Sibur HD85612 IM) is a hexene HDPE, injection produced by SIBUR, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of PE HD85612 IM?
Melt flow rate (190 °C/2.16 kg): 7.5 g/10 min; Density: 0.96 g/cm³.
What is PE HD85612 IM used for?
PE HD85612 IM is typically used for: Crates, Recycle bins, Hard hats.
Where can I buy PE HD85612 IM and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PE HD85612 IM with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.