HDPE HD5403 resin
HDPE large industrial blow molding · PRefChem
Excellent combination of stiffness, ESCR and high impact, including at low temperature; good stacking. Thien An Plastics supplies HD5403 in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- PRefChem (PRefChem HD5403)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE large industrial blow molding
- Processing
- Extrusion blow molding
What is HD5403?
HDPE HD5403 from PRefChem is a HDPE large industrial blow molding, high-load melt index (190 °C/21.6 kg): 2.7 g/10 min; density: 0.954 g/cm³. HD5403 is typically used for: L-ring drums, intermediate bulk containers (IBC), jerrycans. Thien An Plastics (Hanoi, Vietnam) supplies HD5403 in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: PRefChem HD5403, HDPE HD5403, 5403, HD 5403
Applications
- L-ring drums
- Intermediate bulk containers (IBC)
- Jerrycans
Typical properties – HD5403
| Property | Value | Unit |
|---|---|---|
| High-load melt index (190 °C/21.6 kg) | 2.7 | g/10 min |
| Density | 0.954 | g/cm³ |
| Tensile strength at yield | 27 | MPa |
| Notched Charpy impact (23 °C) | 80 (-30 °C) | kJ/m² |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is HD5403?
HD5403 (PRefChem HD5403) is a HDPE large industrial blow molding produced by PRefChem, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of HD5403?
High-load melt index (190 °C/21.6 kg): 2.7 g/10 min; Density: 0.954 g/cm³.
What is HD5403 used for?
HD5403 is typically used for: L-ring drums, Intermediate bulk containers (IBC), Jerrycans.
Where can I buy HD5403 and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies HD5403 with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.