HDPE InnoPlus HD2308J resin
HDPE injection, UV-stabilized · PTT Global Chemical (GC)
Narrow MWD for good impact; UV stabilizer for outdoor use. Thien An Plastics supplies InnoPlus HD2308J in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- PTT Global Chemical (GC) (InnoPlus HD2308J)
- Polymer
- HDPE – High-density polyethylene
- Type
- HDPE injection, UV-stabilized
- Processing
- Injection molding
What is InnoPlus HD2308J?
HDPE InnoPlus HD2308J from PTT Global Chemical (GC) is a HDPE injection, UV-stabilized, melt flow rate (190 °C/2.16 kg): 6 g/10 min; density: 0.962 g/cm³. InnoPlus HD2308J is typically used for: crates, household products, outdoor and auto parts. Thien An Plastics (Hanoi, Vietnam) supplies InnoPlus HD2308J in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: InnoPlus HD2308J, HD2308J, HDPE HD2308J
Applications
- Crates
- Household products
- Outdoor and auto parts
Typical properties – InnoPlus HD2308J
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 6 | g/10 min |
| Density | 0.962 | g/cm³ |
| Vicat softening point | 125 | °C |
| Melting point | 136 | °C |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is InnoPlus HD2308J?
InnoPlus HD2308J (InnoPlus HD2308J) is a HDPE injection, UV-stabilized produced by PTT Global Chemical (GC), in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of InnoPlus HD2308J?
Melt flow rate (190 °C/2.16 kg): 6 g/10 min; Density: 0.962 g/cm³.
What is InnoPlus HD2308J used for?
InnoPlus HD2308J is typically used for: Crates, Household products, Outdoor and auto parts.
Where can I buy InnoPlus HD2308J and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies InnoPlus HD2308J with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.