HDPE PE HD12500 LB resin
Butene HDPE, extrusion & blow molding · SIBUR
Balanced physical properties and ESCR; suitable for food-contact articles. Thien An Plastics supplies PE HD12500 LB in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SIBUR (Sibur HD12500 LB)
- Polymer
- HDPE – High-density polyethylene
- Type
- Butene HDPE, extrusion & blow molding
- Processing
- Extrusion, blow molding
What is PE HD12500 LB?
HDPE PE HD12500 LB from SIBUR is a butene HDPE, extrusion & blow molding, high-load melt index (190 °C/21.6 kg): 12 g/10 min; density: 0.951 g/cm³. PE HD12500 LB is typically used for: technical articles, household articles. Thien An Plastics (Hanoi, Vietnam) supplies PE HD12500 LB in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sibur HD12500 LB, HD12500, HD 12500, PE HD12500
Applications
- Technical articles
- Household articles
Typical properties – PE HD12500 LB
| Property | Value | Unit |
|---|---|---|
| High-load melt index (190 °C/21.6 kg) | 12 | g/10 min |
| Density | 0.951 | g/cm³ |
| Tensile strength at yield | 23 | MPa |
| Elongation at break | 700 | % |
| Notched Charpy impact (23 °C) | 14 | kJ/m² |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PE HD12500 LB?
PE HD12500 LB (Sibur HD12500 LB) is a butene HDPE, extrusion & blow molding produced by SIBUR, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of PE HD12500 LB?
High-load melt index (190 °C/21.6 kg): 12 g/10 min; Density: 0.951 g/cm³.
What is PE HD12500 LB used for?
PE HD12500 LB is typically used for: Technical articles, Household articles.
Where can I buy PE HD12500 LB and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PE HD12500 LB with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.