HDPE PE HD03580 SB resin
Bimodal hexene HDPE, blow molding · SIBUR
Outstanding ESCR/stiffness balance, high impact, enables down-gauging. Thien An Plastics supplies PE HD03580 SB in original bags to manufacturers in Vietnam and for export.
- Producer (per TDS)
- SIBUR (Sibur HD03580 SB)
- Polymer
- HDPE – High-density polyethylene
- Type
- Bimodal hexene HDPE, blow molding
- Processing
- Blow molding
What is PE HD03580 SB?
HDPE PE HD03580 SB from SIBUR is a bimodal hexene HDPE, blow molding, melt flow rate (190 °C/2.16 kg): 0.3 g/10 min; density: 0.958 g/cm³. PE HD03580 SB is typically used for: chemical and detergent containers up to 30 L, oil bottles, cosmetic and pharmaceutical bottles. Thien An Plastics (Hanoi, Vietnam) supplies PE HD03580 SB in original bags with TDS; quotes via WhatsApp/WeChat/Zalo +84 389 980 742.
Also searched as: Sibur HD03580 SB, HD03580, HD 03580, PE HD03580
Applications
- Chemical and detergent containers up to 30 L
- Oil bottles
- Cosmetic and pharmaceutical bottles
Typical properties – PE HD03580 SB
| Property | Value | Unit |
|---|---|---|
| Melt flow rate (190 °C/2.16 kg) | 0.3 | g/10 min |
| Density | 0.958 | g/cm³ |
| Tensile strength at yield | 30 | MPa |
| Elongation at break | 550 | % |
Typical values from the producer's TDS, for reference only and not specifications. Producer and lot may vary; please confirm when ordering.
FAQ
What type of plastic is PE HD03580 SB?
PE HD03580 SB (Sibur HD03580 SB) is a bimodal hexene HDPE, blow molding produced by SIBUR, in the High-density polyethylene (HDPE) family.
What are the melt flow rate and density of PE HD03580 SB?
Melt flow rate (190 °C/2.16 kg): 0.3 g/10 min; Density: 0.958 g/cm³.
What is PE HD03580 SB used for?
PE HD03580 SB is typically used for: Chemical and detergent containers up to 30 L, Oil bottles, Cosmetic and pharmaceutical bottles.
Where can I buy PE HD03580 SB and get its TDS?
Thien An Plastics (Hanoi, Vietnam) supplies PE HD03580 SB with its TDS. Contact +84 389 980 742 on WhatsApp, WeChat or Zalo for a quote.